HASS

Solution to work smarter

More efficient work process. Improved work productivity.

Less reaction layer & Time saving

Stable outcomes & Time saving

Since Amber® Vest prevents from forming reaction layer on results, there is no need for sandblasting.

This invites no need to apply the acid liquid for clean-up of the reaction layer ensuring a simple and nonhazardous process.

TEKNİK ÖZELLİKLER

Amber Vest must always be used with its special mixing liquid EXPANSOR-B, pure or diluted. The dilutions can be effected by adding distilled or demineralised water, shaking slightly and then applying to the bottle an identifying label of the concentration made. 

DO NOT USE EXPANSOR LIQUID WHICH HAS BEEN FROZEN (BECOME CRYSTALLISED)

• To obtain good results, it is essential to use precise measurements.
• For greater ease of use, Amber® Vest is supplied in predosed sachets of 100g, and a dosing tube is supplied for the liquid.
• It is always recommended to use whole sachets and to measure the liquid with the original dosing tube.
• In the case of using non-pre-dosed portions of powder, weigh the exact contents with a scale.

The powder liquid ratio

100g powder : 26 ml liquid

DO NOT USE BOWLS NEITHER CONTAINERS WHICH HAVE BEEN IN CONTACT WITH PLASTER.

Prepare the liquid EXPANSOR-B according to the concentration required (as indicated above).

Add the powder to the liquid and mix vigorously by hand to obtain a totally moist and uniform mass. Then pass to mechanical vacuum mixing for 60 seconds depending on the mixer.